Konica KM1024 SHB 6PL Printhead for Docan M2, AOJet APro 320F, Yinghe YH-3304X

Description

Konica KM1024 SHB 6PL Printhead
Description:
The Konica Minolta KM1024 SHB Print Head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 SHB print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 SHB print head has 1024 nozzles with a droplet size of 6 pico litre and a native resolution of 360 dpi. The print head has an integrated heater, which makes it ideal for UV inks, but suitable for solvent inks as well. This print head is also known as the Konica Minolta KM1024 SHB. This is Konica original print head and it includes the Head ID and the necessary waveform information.
Printer compatibility:
Docan M2, AOJet APro 320F, Yinghe YH-3304X, IIJ Colourprint 72 / Monoprint 72
Colourprint 282 / Monoprint 282 / Colourprint 352 / Monoprint 352 / Colourprint 142HQ, Inktec Jetrix 1212FK
DP part number:
PPHKM1024SH
Remarks:
Original
Specifications
Model
PRH-KON-013
Technology
On-Demand Piezo Electric (Shared Wall 3 Cycle)
Native Resolution
180dpi x 2 = 360dpi
Cal. Droplet Size
6 pico litre
Max. Drops in Greyscale
8 drops
Tot. Amount of Nozzles
512 nozzles x 2 = 1024 nozzles
Nozzle Spacing
70.5 μm
Print Width
72 mm
Firing Frequency
26 kHz
Ink Compatibility
UV and Solvent Inks
Heater
Integrated
Attention:
1. The printhead is required to be installed by professional persons.
2. Due to the nature of printer parts and the many factors that go into installing them, we do not accept returns or give refunds on electronic or service parts. Once the package is delivered, it is the customer's responsibility to check the package for damage. If there is any visible damage on the package, please refuse the shipment and contact us via ebay message. thanks.
3. Please seriously pay attention on information of printhead model while purchasing from us. Once received your item, please inspect if the printhead matches up with the model you required.If you have any problems, it is very important that contact us as soon as possible before installing it onto machine. Please be aware that we don't accept any return and refund once the printhead is installed on the machine.
4. The fragile sticker pasted on printheads is a label to prove that such products are sold from our company. Please be aware that REMOVING the label and INSTALLING the printhead on your machine, you WON'T be entitled to our aftersales services including technical support, return and refund.